Garage floor epoxy in Dallas-Fort Worth — done in one day.
Polyaspartic-grade systems installed under the Coat Pro prep standard. Diamond-grind every floor, walk on it the next morning, lifetime workmanship warranty on every install.
Free 24-hour quote.
Tell us about your garage. We walk it before we quote — one fixed number, no surprises.
Concrete wasn’t built for what you use it for.
In Dallas–Fort Worth, your garage slab takes on expansive clay slabs, triple-digit summers, and hailstorm-prone weather. Bare concrete was poured to hold up your house — not to live with years of oil drips, hot tires, and everything the DFW metroplex throws at it. Left raw, a Dallas–Fort Worth garage floor only gets worse: it stains, dusts, and cracks until you stop wanting to open the door.
Most Dallas-Fort Worth garages we’re called out to are dealing with one or more of these problems:
- Oil and brake fluid stains that won’t power-wash out
- Hairline cracks from slab movement and seasonal swing
- Peeling DIY epoxy from a Home Depot kit that didn’t hold up
- Hot-tire pickup (your old coating literally lifting off when you park)
- Dust — that constant fine gray dust that gets into every box on the shelf
- An aesthetic that just makes you not want to open the garage door
The fix is straightforward — but only if it’s done right. Cheap big-box kits skip prep entirely (acid etch isn’t prep, it’s a chemical wash). Pro polyaspartic coatings done over diamond-ground concrete bond mechanically to the slab and last 20+ years. The chemistry and the prep are non-negotiable.
Why Dallas–Fort Worth garages punish the wrong coating.
DFW’s notorious expansive clay cracks slabs, and triple-digit summers plus sudden storms make a properly bonded, flexible coating essential.
The metroplex is full of newer three-car suburban garages on clay lots — big floors that show every crack and tire mark when they’re left as bare or painted concrete. Diamond-grind prep with crack repair plus a flexible polyaspartic system handles DFW slab movement and heat far better than a rigid epoxy kit that telegraphs every crack.
The Dallas–Fort Worth build difference comes down to prep and the right resin. We diamond-grind to a profile that bonds, repair what the DFW metroplex’s conditions have already done to the slab, then lay a polyaspartic-grade system rated for expansive clay slabs, triple-digit summers, and hailstorm-prone weather. That’s how a Dallas–Fort Worth garage floor still looks new years later instead of peeling, hazing, or lifting like a weekend kit.
We coat garages across Dallas–Fort Worth and the DFW metroplex — Plano, Frisco, Euless, Fort Worth, Arlington, Irving, McKinney, and Garland — and in neighborhoods like Downtown Plano, Willow Bend, Legacy, Russell Creek, Gleneagles, and Chase Oaks. Every Dallas–Fort Worth slab is diamond-ground and spec’d for expansive clay slabs, triple-digit summers, and hailstorm-prone weather, not a generic recipe copied from another region.
Does the clay soil in DFW cause coating problems?
Expansive clay causes slab movement and hairline cracks. We repair cracks and use a flexible polyaspartic buildout that moves with the slab, so the finish stays intact across Dallas–Fort Worth seasons.
Can you coat a big three-car garage?
Absolutely — large three-car DFW garages are our most common job. Fast-curing polyaspartic means even big floors are back in service in about a day.
The polyaspartic spec — explained.
No mystery chemistry. Here’s exactly what goes on your garage floor, in plain English.
The system, layer by layer
Substrate
Primer
Base coat
Broadcast
Topcoat
Why polyaspartic, not epoxy? Polyaspartic is the next-generation coating chemistry. It’s more flexible (handles slab movement without cracking), UV-stable (won’t yellow in Dallas-Fort Worth sun), faster-curing (one workday instead of three), and more chemical-resistant (handles brake fluid, oil, solvents, deicer). Epoxy is older. Polyaspartic is just better technology.
Why diamond-grind, not acid etch? Acid etching softens the surface of the concrete with hydrochloric acid. It looks like prep, but it doesn’t open the slab for mechanical bonding. Diamond grinding uses metal abrasive heads on industrial planetary grinders to remove the top 1–2mm of concrete — exposing fresh substrate that the coating chemically and mechanically bonds to. It’s the single biggest factor between a 3-year DIY failure and a 20-year pro install.
Why 5 layers, not 2? Two-coat systems are what comes in the box at Home Depot. Real installs need primer to lock the substrate, pigmented base for color, decorative broadcast for texture and visual depth, and a clear topcoat for wear protection. Skip any of those and the floor either fails or looks cheap. We don’t skip layers.
Four steps. No surprises. Every floor.
The same playbook on every Dallas-Fort Worth garage — the one every installer is trained on.
Walkthrough
We meet you at the garage. Measure the slab. Check for cracks, oil contamination, prior coatings. Talk about color and finish.
Fixed quote
One number, in writing, within 24 hours. Includes prep, repair, install, materials, warranty. The quoted price is the invoiced price.
Diamond-grind prep
Crew arrives early. Slab is ground to bare concrete, cracks repaired, dust HEPA-vac’d, primer applied. Half the install day is just prep.
1-day install
Base coat, flake broadcast, topcoat — all in one workday. You walk on it the next morning. You park on it 48 hours later.
Color, flake, and finish.
Four signature blends most Dallas-Fort Worth garage owners pick. Plus dozens of custom options if you want something specific — we bring physical samples to the walkthrough.
See what our work looks like in year ten.
Before and after — real customers, real homes, real floors that still look this way.
Honest pricing, in plain numbers.
We don’t publish a single sticker price because no two garages are the same. But here’s what most Dallas-Fort Worth customers actually pay — published openly, because we’d rather you know than guess.
What’s always included in our quote: diamond-grind prep, crack repair, primer, base coat, flake broadcast, topcoat, lifetime workmanship warranty, cleanup. Nothing gets added later.
Get my fixed quoteThe standard behind every Dallas–Fort Worth floor
Diamond-ground prep
Every Dallas–Fort Worth slab is mechanically diamond-ground, not acid-etched, so the coating actually bonds and stays down.
Most garages in a day
A standard garage is prepped, coated, and topcoated in one day. Back to parking without a week of downtime.
Bonded and insured
Fully bonded with liability coverage. Ask for the certificate before any crew starts.
The Coat Pro Standard
A written commitment on adhesion and finish. If a covered issue shows up, we come back and make it right.
More than just garage floors.
Common ones, plainly answered.
Is a garage floor coating worth it in Dallas–Fort Worth?
The value case, what’s driving 2026 prices, and how to get the most for your money.
Read the guide →Get your garage floor quoted in 24 hours.
Free walkthrough. Fixed quote. The Coat Pro prep standard on every install.